|
|
|
Pumps - Centrifugal
Berkeley Pumps
As Berkeley Dealers we sell, maintain and service on site. All warranties are handled at our location.
 |
EDD & EEDD Series
Sta-Rite Industries engine-driven centrifugal pumps can be used where electrical power is not available. Powerful 4-cycle gasoline engines get the job done faster and more efficiently.
- These engine-driven centrifugal pumps an be used where electrical power is not available.
- Stub shaft allows easy replacement with other gasoline-powered engines.
- Quality Construction - Close-grained cast iron body, specially treated for corrosion resistance.
- Close-coupled EDDH has pump and engine close-coupled on all steel base…16" long, 14" wide, and 13-1/8" high
- EDDH features 5/8" diameter, ductile iron threaded shaft extension
- Frame-mounted EEDDH features pump and engine frame-mounted on all-steel base…18-11/16" long, 14" wide, and 13-1/8" high. Stub shaft allows easy replacement with other gasoline-powered engines
- EEDDH has 3/4" diameter keyed ductile iron shaft extension
Literature
|
|
.jpg) |
J & JB Series
J/JB Series and other Sta-Rite Industries centrifugal pumps can be ordered with T.E.F.C. motors, and with other design characteristics. J Series with Noryl¨ impellers is abrasion-resistant for normal applications with working temperatures to 140 degrees Fahrenheit.
- High Head and Medium Head Models - Heavy-duty motors, easy service design and four-position discharge.
- Easy Serviceability - All models include replaceable wear ring and feature back pull-out design.
- Drain Port - Provides for easy winterizing
- Body and Seal Plate - Close grained cast iron.
Literature
|
|
 |
D Series
Available in high head or medium head series. Feature leak-proof mechanical seals, easy service design, heavy-duty motors, rugged construction.
- 1 through 5 HP - Both high head and medium head models offer heavy-duty motors, easy service design, and air volume control tapping.
- Easy Serviceability - Normal wearing parts are easily accessible for service and replacement, without disturbing piping and mounting.
- Heavy-duty Motors - Designed for continuous operation. Capacitor start, will not cause electrical interference with TV or other appliances. Nationally known motors have ball bearing, stainless steel shaft. For single- and three-phase operation, 3450 RPM.
- Drain Port - Provided for easy winterizing.
Literature
|
|
 |
DS3 Series
The New ProStorm™ Series of cast iron sprinklers offer superior unmatched performance available in 1 HP through 2-1/2 HP models.
- Rugged Construction - Close-grained cast iron body, specially treated for corrosion resistance.
- Easy Serviceability - Normal wearing parts are easily accessible for service and replacement, without disturbing piping or mounting.
- Precision Molded Diffuser - Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
- Motor Windings - Superior insulation materials protect against excessive moisture and contaminants... ensures prolonged motor life.
Literature
|
|
 |
PD Series
Quick-priming PD pumps feature lightweight construction in a self-priming design. The 1 and 1-1/2 HP models offer a new, stronger pump body with reinforcement ribs and also a new 2" suction.
- Quality Construction - Fiberglass-reinforced thermoplastic provides total corrosion resistance to sandy water.
- Easy Serviceability - Normal wearing parts are easily accessible for service and replacement, without disturbing piping and mounting.
- Dustproof Cover - Electrical components protected from dust and insects.
- Lightweight Design - Space-age materials make these pumps more portable than conventional cast iron pumps.
Literature
|
|
 |
CC Series
The CC Series Pumps are compact and lightweight, but rugged. Choose from 3 or 5 HP high head and medium head models.
- Compact and Lightweight - Can be installed where most other 3 and 5 HP pumps will not fit
- 4-Position Discharge - Permits installation with discharge horizontal or vertical, to right or left.
- Medium head models offer heads to 75 feet and capacities to 220 GPM. High head models offer heads to 102 feet and capacities to 260 GPM.
- Ideal for water systems and sprinkling for homes, farms and industry.
Literature
|
|
 |
DPC Series
The DPC Series self-priming centrifugal pump is a rugged cast iron pump capable of priming up to 20' vertically and will handle solids up to 0.225" diameter.
- Built-in Convenience - Comes complete with built-in overload protection with automatic reset and a built-in check valve.
- Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
- Mechanical Seal - J. Crane type 6A or equal. Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal part.
- Ideal for effluent and wastewater removal, sump drainage, dewatering, circulation and fountains.
Literature
|
|
 |
DSS4HG Series
The DSS4HG series pumps are self priming, suitable for a variety of applications such as irrigation systems, fountains, washing systems, heating and cooling systems, and other water supply systems. Flows to 60 GPM, Heads to 240 feet.
- Flows to 60 GPM, Heads to 240 feet (104 psig).
- Self-priming design - Once initially primed, the DSS4HG will automatically re-prime cycle after cycle.
- Noryl® impellers & diffusers - precision molded extra-smooth ports to maximize efficiency and performance.
- Priming valve - special brass priming valve, patented for trouble-free operation during the priming cycle.
Literature
|
|
 |
Gas Engine Drive Pumps
Lightweight, corrosion resistant, engineered composite pump construction make this engine-driven pump extremely versatile for applications where electrical power is not available.
- Rugged Light-Weight Design
- Corrosion Resistant Composite Pump Construction
- Chemical Resistant Viton Seals, O-rings with Stainless Steel Fasteners
- Built-in Check Valve
Literature
|
|
 |
HP & HPS Series
This pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.
- Patented Stage Design - The proven SignaSeal staging system utilizes a patented ceramic wear surface that, when incorporated with Sta-Rite's "true" independent floating impellers, dominates with 1st-in-class performance, superior sand handling and thrust management staging system.
- Motor Windings - Superior insulation materials protect against excessive moisture and contaminants…assures prolonged motor life.
- Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
- Dustproof Cover - All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate.
Literature
|
|
 |
Type B End Suction Centrifugal
Type B End Suction pumps are ideal for many OEM, Industrial, Commercial and Agricultural markets. Flows to 5000 GPM. Heads to 635 feet.
- Flows - to 5000 GPM with heads to 635 feet (275 psig).
- Cast Iron or Silicon Bronze Impellers - dynamically balanced for long seal life and quiet operation.
- Easy Service - back pull-out design, entire motor may be removed for servicing impeller, mechanical seal or motor without disturbing plumbing.
- Silicon Bronze Wear Ring available on some models.
Literature
|
|
 |
SSCX Series
The SSCX series stainless steel pumps are designed for applications where corrosion resistant dependability is essential. Flows to 100 GPM, Heads to 135 feet.
- Flows to 100 GPM, Heads to 135 feet (57 psig).
- Stainless steel housing and shaft - maximum corrosion resistance in chemical as well as water applications. Housing includes drain/vent ports for quick priming & easier draining.
- Available in either Noryl® or 304 stainless steel impellers.
- Mechanical shaft seals are precision lapped and highly polished for long life and reliability.
Literature
|
|
 |
CP/CB Series
CP/CB series and other Berkeley pumps are capable of working temperatures to 140 degrees fahrenheit. Flows to 130 GPM, Heads to 140 feet.
- Flows to 130 GPM, Heads to 140 feet (60 psig).
- 1/3 through 2 1/2 HP - High head and medium head models, with heavy-duty motors, easy service design and four-position discharge.
- Noryl® or brass impellers are available in both medium and high head designs.
- Easy serviceability - all models include replaceable wear ring and feature back pull-out design.
Literature
|
|
 |
ECC5 Series
The ECC5 Series self-priming centrifugal pump is a rugged cast iron pump capable of priming up to 20' vertically and will handle solids up to 0.225" diameter.
- Motor - 1/2 HP, 3450 RPM, 115 Volt split phase, 60 Hz. Built-in thermal overload protection with automatic reset.
- Mechanical Seal - Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal part.
- Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
Literature
|
|
 |
Type B Multistage
Type B High Pressure pumps service a wide range of pumping applications in the industrial, municipal, commercial, and agricultural markets. Flows to 165 GPM, Heads to 660 feet.
- Flow Rates - to 165 GPM, Heads to 660 feet (280 psig).
- Heavy-duty cast iron construction with silicon bronze impellers.
- Low NPSH (Net Positive Suction Head) requirements.
- NEMA standard motors selected to meet our high standards for durability, reliability, and longevity.
Literature
|
|
 |
Hydraulic Drive End Suction
Hydraulic Drive End Suction Pumps are heavy duty pumps for special applications where driving a pump with an electric motor or internal combustion engine is not practical. Hydraulic motor drives are ideal for many industrial & OEM applications where drive options, environmental conditions and space considerations are an issue.
- Flows to 1000 GPM, Pressures to 180 feet (80 psig).
- New state-of-the-art heavy duty bearing frame is designed for durability - delivering in excess of 20,000 hours of bearing life.
- Greased-for-life bearings - sealed bearings handle the toughest conditions with less maintenance for more reliability.
- Small, compact design - makes the B3ZR-HYD a perfect fit for a wide variety of applications.
Literature
|
|
 |
Hydraulic Drive Self-Prime
Hydraulic Drive Self-Prime Pumps are heavy duty pumps for special applications where driving a pump with an electric motor or internal combustion engine is not practical. Hydraulic motor drives are ideal for many industrial & OEM applications where drive options and space are limited.
- Flows to 550 GPM, Pressures to 130 feet (55 psig).
- Extra-large priming chamber - for faster, trouble-free priming and repriming.
- Heavy-Duty Power Frame is designed for durability delivering in excess of 20,000 hours of bearing life. Includes large shaft and grease-for-life sealed bearings to handle the toughest conditions with less maintenance and more reliability.
- Priming Port - enables priming without removing discharge connections.
Literature
|
|
 |
SAE End Suction
SAE End Suction Pumps are suitable for any application requiring the convenience of an internal combustion engine as a power source. End Suction pumps must be flooded prior to operation.
- Twenty-eight pump models, with flows to 6500 GPM, Pressures to 500 feet (215 psig).
- Cast Iron or Silicon Bronze Impellers are available in either packed or mechanical seal configurations. Replaceable stainless steel shaft sleeve is standard, providing maximum corrosion resistance while minimizing shaft wear.
- Volute case - Back pull-out design allows easy removal and repair without disturbing piping connections, and completely exposes the impeller for flushing or service.
- Heavy-Duty Power Frame is designed for durability delivering in excess of 20,000 hours of bearing life. Includes large shaft and grease-for-life sealed bearings to handle the toughest conditions with less maintenance and more reliability.
Literature
|
|
 |
SAE Self-Prime
SAE Self-Prime Pumps are suitable for any application requiring the convenience of an internal combustion engine as a power source.
- Five pump models, with flows to 800 GPM, Pressures to 175 feet (75 PSIG).
- Extra-large priming chamber - for faster, trouble-free priming and repriming.
- Priming Port - enables priming without removing the discharge hose. Built-in check valve prevents siphoning and need for re-priming.
- Heavy-Duty Power Frame is designed for durability delivering in excess of 20,000 hours of bearing life. Includes large shaft and grease-for-life sealed bearings to handle the toughest conditions with less maintenance and more reliability.
Literature
|
|
 |
Type B Frame Mount End Suction
Frame Mount End Suction Pumps are suitable for any application where the use of an independent power source (motor, engine, etc.) can be coupled to the pump shaft using a flexible coupling. End Suction pumps must be 'flooded' prior to operation.
- Forty pump models, with flows to 5500 GPM, Pressures to 500 feet (215 psig).
- Cast iron or silicon bronze impeller are available in wither packed or mechanical seal configurations.
- Volute case - Back pull-out design allows easy removal and repair without disturbing piping connections, and completely exposes the impeller for flushing or service.
- Heavy-Duty Power Frame designed for extended service life. Includes large shaft and large anti-friction bearings for maximum life and minimal shaft deflection.
Literature
|
|
 |
Type B Frame Mount Self-Prime
Frame Mount Self-Prime Pumps are suitable for any application requiring the use of an independent power source (motor, engine, etc.) can be coupled to the pump shaft using a flexible coupling.
- Four pump models, with flows to 700 GPM, Pressures to 500 feet (215 psig).
- Built for continuous dependable performance and ease of repair.
- Extra-large priming chamber - for faster, trouble-free priming and repriming. Priming Port - enables priming without removing the discharge hose.
- Heavy-Duty Power Frame designed for extended service life. Includes large shaft and large anti-friction bearings for maximum life and minimal shaft deflection.
Literature
|
|
 |
MGP & MGPS Series
The MGP Series utilizes the patented SignaSeal floating impeller design which minimizes thrust loads allowing for continuous operation without damage to pump, mechanical seal or pump hydraulic components. Applications include commercial, or agricultural pressure washing, spraying systems, and reverse osmosis.
- Patented Multi-Stage Design - Greatly reduces problems with abrasives and running dry.
- Motor Windings - Superior insulation materials protect against excessive moisture and contaminants…assures prolonged motor life.
- Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation.
- Dustproof Cover - All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components.
Literature
|
  |
|
|
