|
|
|
Pumps - Effluent
Berkeley Pumps
As Berkeley Dealers we sell, maintain and service on site. All warranties are handled at our location.
 |
ES2 Series
Our best, the EC2 Series submersible pumps are constructed of rugged cast iron, with a non-clog vortex impeller typically used in septic tank effluent applications.
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Construction - Heavy-duty cast iron motor housing and upper volute.
- Overload Protection - Built-in thermal overload with automatic reset.
- Cord Seal - Prevents oil loss from and protection for motor if cord is damaged.
Literature
|
|
 |
EC3 Series
The EC3 Series pump is a small, rugged, submersible cast iron pump with a non-clog vortex impeller and solids handling capability to 3/4".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Cord Design - Easily replaceable or retrofitted with optional 50' power cord.
Literature
|
|
 |
HT3 & HTX3 Series
The HT3/HTX3 Series pump is a small, rugged, submersible, cast iron pump with a non-clog vortex impeller and solids handling capability to 3/4".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Cord Seal - Prevents oil loss from and protection for motor if cord is damaged.
Literature
|
|
 |
EC4 Series
The EC4 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capablility to 3/4".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Cord Seal - Prevents oil loss from and protection for motor if cord is damaged.
Literature
|
|
 |
EC6/EC7/EH7 Series
Our best, the EC6/EC7/EH7 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset on single phase.
- Cord Seal - Prevents oil loss from and protection for motor if cord is damaged.
Literature
|
|
 |
HT7 Series
The HT7 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller. It has solids handling capability to 3/4" and is designed to handle liquids to 200° F (93° C).
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Construction - Cast iron motor housing, volute and impeller with stainless steel hardware for long life.
Literature
|
|
 |
EC9 Series
The EC9 Series pump is a rugged, submersible cast iron pump with a non-clog, semi-open impeller and solids handling capability to 3/4".
- Dual Shaft Seals - Primary mechanical seal with a secondary self-lubricating lip seal.
- Seal Plate Barrier Ring- The seal plate barrier ring protects the seals from debris.
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Overload Protection - Built-in thermal overload with automatic reset on single phase.
Literature
|
|
 |
STEP Plus
The new STEP Plus™ 4" submersible effluent pumps in 10 and 20 GPM models offer dependable performance and value for high pressure filtered effluent applications.
- Patented Staging System - Greatly reduces problems with abrasives, sand lock-up and running dry.
- Shaft - Positive drive 300 grade stainless steel 7/16" hexagonal shaft.
- Discharge - Fiberglass-reinforced thermoplastic.
- Discharge Bearing - Exclusive self-lubricating Nylatron® bearing resists wear from sand.
Literature
|
|
 |
ST.E.P. Plus D Series
This 4" submersible pump in 10, 20 and 30 GPM models dominates with superior "DRAW-DOWN" capability. Sold & proven in aerobic & filtered effluent service applications.
- Patented Stage System - The proven SignaSealTM staging system utilizes a patented ceramic wear surface. When incorporated with Sta-Rite's "true" independent floating impellers it enables industry exclusive "dry-run" capacities.
- Cooler and quieter operation - The ST.E.P Plus Dominates by using the pumped liquid to cool the motor as it passes over the motor.
- Reduced amp draw - The ST.E.P. Plus Dominates in this class with less energy consumption - over 25% less amp draw.
- Shaft bearing - Exclusive self-lubricating Nylatron® bearing resists wear surface from sand and abrasives.
Literature
|
|
|
